Baby Equipment just like any other types of equipment also needs proper care and maintenance and baby swing is not an exception. Swings are easy to maintain, it should just be given regular cleaning and checks on the important parts of the base or the harness.

If there are some problems your swing, you might want to check if the swing can still be repaired to avoid spending more on having to buy a new one. It is important to note, however, that you should also identify what swings can still be fixed and repaired and what are the ones that will already need a replacement.

Here are no-fuss tips to easily repair your baby swings:

When dismantling the swings, always be mindful of the screws that are all around the swing. You should properly identify the right screwdriver for the screws. Be careful in taking each of them while dismantling the swing, remember that each screw is important to ensure that after the swing has been repaired or fixed, it is should still be secured and hold up and the screws are vital to ensure that the foundation of the swing is strong.

Make sure that when trying to dismantle the swing, there are no kids playing round near you. You don’t want them to accidentally spill something or cut the thin wires being exposed while the head of the swing is dismantled. A wire cut might cause severe malfunctions to the swing and might ultimately destroy its motor functionality. Now, for the motor, take each part out gently, again take note if there are any screws that need to be removed before pulling any part out to avoid damaging the parts or pulling and breaking out any wires.

Motor replacement is simple just take not how to properly dismantle the head of the swing and properly remove the motor from the parts connected to it then replacing it will be at ease as long as you don’t miss any screws when putting the swing back altogether. Remember to replace the motor with the same type as it might cause the short circuit to your swing. Be very delicate in pushing, twisting as well as sliding the brand new motor in the head of your swing. After which try to test if it works and the swing is functioning as expected.

It is better if you know your baby swing, each swing manufacturer has different styles and models of their swings. It is best if you get familiar with the operation and user manual guide of your swing. Read the instructions and be familiar with each and every part of the swing so you would know how to properly maintain them as well as the parts which can be dismantled and assembled, which ones are hazardous or needs to take precaution in dismantling or assembling.

It also better if you know your manufacturers well, manufacturer’s reputation says a lot about to their products. Good quality products are reflective of the commitment of the manufacturers to their customers that is why it is important to consider in choosing a swing and usually these are the swings that are long-standing and durable.

These are the ones that can still be salvaged and repaired and with proper care and maintenance can sustain another round of demanding the use of the baby and of course allow you more room in your budget for those sexy maternity dresses you’ve been eyeing! Swing owners should also be mindful that not all the time swings can be repaired or fixed, they should also be mindful of the wires if they are already open as it will destroy the swing. Check if they can still be salvaged by electric tapes as it is crucial to the function of the swing.

Additionally, you should also check if the harness is still tight or already loose due to the use (or overuse) of the swing with the baby. It is important that the harness can still hold the baby safely and securely as it is the first and foremost the function of the harness. Also, check the harness locks and make sure that they are still durable and can still stand another batch of use of the swing. Problems do occur even in the best baby swings.

Another thing that is important to be tackled is cleaning the swing. You need to be familiar what are the parts that can be removed cleaned or soaked into soap and water and which parts should be at all times avoid water contact as it will destroy the functionality of the swing.

At the end of the day, the most important thing is that the swing should function properly and the baby is secured. The parents should be able to quickly assess and identify if the swing can still be fixed as it is important not to jeopardize the safety and security of the baby. If the swing looks like it can’t be fixed or repaired it might be best to replace it with a new one.

We will also post a buying guide for you so you can easily get a high-quality swing that is just right for you and your baby.

The Baby Brezza Pro One: The Easy Way to Mix and Heat Formula

Long gone are the days when a mom (or dad) had to warm baby formula on the stove-top, poking a finger in the liquid every so often to test the temperature. It seemed as though it took forever to heat, especially when the baby was crying (which was almost always).

Then, after pouring the warm formula into the baby bottle you always had to test the temperature by squirting a few drops on the back of your hand. I remember those days well, but then came the microwave and parents began warming bottles a new way. I never used the microwave to warm a baby bottle because I was weary of what the electromagnetic waves would do to the milk.

In addition, the warnings about using plastic in a microwave oven were always in the back of my mind, “Always use glass,” the experts said. For the longest time, those were the only two options…until now!

Brezza Formula Pro One Step Food Maker

It’s been referred to as the Keurig for babies. The Brezza works similar to the popular coffee maker and takes all the hassle and guess work out of making the perfect bottle for your baby.

This device does all the work for you. It measures the correct amount of powdered formula, dispenses and mixes it with pre-filled water, then heats the mixture to the correct temperature and pours the formula into a bottle without air bubbles.

All you have to do is press a button, and within a mere few seconds you’ve got a bottle ready to serve a cranky baby.

One of the benefits of the Brezza is that, like the Keurig, the water and powdered formula are put into separate compartments within the machine ahead of time and stored there.

The machine is ready when you are and all you have to do is place a bottle under the spout and press a button.

You can also set the Brezza to prepare the amount you want, from 2 to ten ounces. It’s that easy! The appliance stores enough formula and water to make twenty, 8-ounce baby bottles.

The water tank is easy to remove, clean, and fill. The unit works with all bottle sizes and formula brands.

You don’t even have to squirt sample drops on your arm any longer (but I’m sure you will) because the unit is equipped with a temperature control that heats the mixture to the perfect temperature for feeding.

The next time you’re up in the middle of the night, mixing and warming baby formula over the stove while your baby is crying, think about how easy it would be to simply push a button and have a perfectly warmed bottle in seconds!

The Brezza Formula Pro One Step Food Maker is the perfect gift for first time mothers almost as good as those sexy maternity dresses for moms to be, or anyone with an infant. We’ve come a long way . . . baby!

Ten Top Rated Baby Food Processors 2020

As a Mother of four I’ve had to get creative more than a few times in order to make ends meet. One of the ways I’ve really been able to save a lot of money to use towards sexy maternity clothes is by using a baby food maker or processor.

It’s hard enough when the baby arrives to afford diapers, so once they switch from formula or nursing to baby food, it’s another expense that, while I’m ready for, is always hard to deal with. In this post I’ll review some of the top rated food processors for baby food in 2019.

Reasons to Make Your Own Baby Food

1. It can save you money. While it certainly isn’t the case with all types of baby foods, inexpensive foods like bananas are up to 50 percent cheaper if you make them on your own.
2. Eco-friendly. No more glass jars, plastic containers, or boxes.
3. You choose the ingredients. It’s always a good idea to know exactly what you’re feeding your baby. Also, since types of baby foods are somewhat limited you can make anything you want. When your baby gets old enough she can get accustomed to the types of food that your family eats.

How do you make baby food?

Other than using a food processor (I’ve listed some of my favorites below), you can use a food grinder, hand blender, blender, or even a fork as long as you make sure that the baby food is properly mashed or pureed based upon the age of your child. If you want to know what the best starter foods are for your baby, then I highly recommend this article on switching to solid foods for additional information.

#1 Beaba Babycook Baby Food Maker

I starting using the Beaba Babycook after my second child. This French made blender won the 2008 JPMA Innovation Award and is probably my favorite tool for making my own baby food.

After trying to make my own baby food with multiple products it just seemed to make sense to use one product to steams, purees, defrosts and reheat.

Once you’re done you can just take the bowl and the basket and throw them in the top of your dishwasher. Yes, it is possible to make baby food using a steam basket, a pot, a strainer, a blender and some ice cube trays, but believe me, it is a major pain.

And if it takes too long, then often times you won’t be as motivated to do it.

Since the Beaba Babycook does all the work for you in one small, easy to clean container, you’ll be sure to use it often. Once you get used to it you’ll be able to make a week’s worth of baby food in around an hour or two.

Quick Tip: Leave the water reservoir open and allow it to air dry to avoid any future mold.

#2 Kidco Babystep Electric Food Mill

This food mill is a cost effective way for parents to enter the world of baby food making. At about $30, there’s not a huge investment or risk. The best thing about this machine is its simplicity. It works similar to the Baby Bullet but doesn’t come with the storage containers or books.

Just put the cooked food into the 2 cup bowl, place the motor on top and press down to start blending. There’s a turbo button that you can use for a finer blend or to pulsate the blades.

With a smaller bowl than many other baby food processors, it’s not as easy to make leftovers if you want to freeze them. The small amounts means that it’s easier to control the consistency and get a smoother result. All the parts except the motor are dishwasher safe and easy to clean if you wish to use this multiple times a day.

What is great about this mill is its easy portability. If you travel a lot, you can easily take it with you and still give your baby fresh foods without a hassle. The processor is very powerful and does a thorough job.

#3 Baby Brezza One Step Baby Food Maker

When dealing with small kitchen appliances, the safest bet is to get a high quality product. It will last longer and give you less grief than a cheap gadget. The sticker shock of the Baby Brezza may overwhelm you at first, but it’s a wonderful machine that can save you time and money in the long run.

The beauty of the Baby Brezza is that food can be steamed and pureed in the same bowl, without having to move food between steamer and blender. The four settings (steam only, blend only, blend and steam, and reheat and defrost) allow you to use this machine in a variety of ways.

The bowl holds approximately 2 ½ cups. It can steam vegetables, fruits, and even ground meats. Just set the timer and walk away. Once the food is cooked, you can blend as little or as much as you need to achieve the desired consistency. The dishwasher safe parts make cleanup easy and hassle free.

The Baby Brezza has a small footprint and doesn’t take up much counter space. It is great for those who want to use it everyday and not have to worry about freezing large quantities of baby food. For those who like to have extra baby food in the freezer, the Baby Brezza is great because the bowl is large enough to hold several meals worth of food.

All in all, as someone who tried (and failed) multiple times to make my own baby food, I really wish I had had this machine when my kids were little.

#4 Baby Bullet Complete Baby Care System

From the makers of the popular Magic Bullet blender, comes the new Baby Bullet baby food system. This system is like a mini blender so you can puree, chop, and mill your own baby food. It comes with a large, 32 oz batch bowl to make multiple servings of baby food. Also included are two short cups that hold approximately 12 oz each. There are six single serving (2 oz) storage cups that have a dial to mark the date, so you always know the food’s freshness.

The two blades that are included are the milling blade and the blending blade. The milling blade lets you grind whole grains to make your own 100 percent whole grain cereals. This is a fantastic option as whole grains are incredibly healthy, much more so than their processed counterparts. The blending blade lets you chop and puree cooked fruits, vegetables, and meats.

The Baby Bullet system comes with an amazing book that informs parents about when to introduce certain foods to baby and includes lots of wonderful, wholesome recipes.

All the cups, bowls, lids, and storage trays are dishwasher safe and are BPA and Phthalate free. The cups and containers are made out of a non-toxic, high impact plastic that won’t shatter if dropped.

#5 Munchkin Baby Food Grinder

This handcrank mill is inexpensive and fun to use. Made of plastic that is free of Phthalate, BPA, Nitrosamine, Latex, and PVC, you can rest assured it won’t be leaching toxins into your baby’s food. Keep in mind that this mill is only about $10 and oftentimes, you get what you pay for. Remember to turn the mill clockwise or else all the pieces will come apart. The multiple pieces are difficult to clean. It will probably leak, so make sure to use in the sink.

This mill is supposed to work with cooked foods. It won’t do a good job of grinding hard fruits and vegetables. If the food is cooked, it will grind the food into a nice puree in baby sized quantities. For the price, it does the job well.